You Are At :: Hardware
Image		Supplier / Model:

		Supplier:Camfil Farr / Model:: Absolute Prefilter Kit Absolute Prefilter Kits - Prefilter Kits for Absolute Built-up Bank Installations. Camfil Farr Absolute Prefilter Kits allow installation of Camfil Farr's wide variety of prefilters in front of absolute filters as installed in Camfil Farr’s Magna Frame I/II/III holding frames or Magna-Grid built-up bank systems. The kits include the Camfil Farr Type 8 frame (for full-size), or an adapter frame (for undersized), and swing bolt assemblies to install one or two stages of prefiltration upstream of the absolute filters. More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Farr Fasteners Camfil Farr fastener are available for built-up bank holding frames or housings that incorporate frames to ensure that air filters fit securely in the holding mechanism. .A gap around a 24” by 24” filter may result in as much as 18% air bypass, or the equivalent of a 3” hole in the middle of the filter. The use of the correct fastener, and the proper number of fastener, ensures that the airmoving through the system will be wholly treated by the air filters ensuring improved indoor air quality for the facility. More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Glide Pak The Camfil Farr 3P Glide/Pack® has set the standard for side-access housing integrity for over 20 years. With its integral universal final filter holding frame virtually all of the air seen by the filter will be treated by the filter. More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Magna Hepa Frames The Camfil Farr Magna-Frame is an individual holding frame designed to ensure that the system efficiency equals the filter efficiency. Is available with an optional absolute prefilter kit that allows the installation of an absolute filter, ASHRAE high efficiency filter, and prefilter in one assembly. Absolute filter integrity is not compromised during prefilter service. More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Magna Pac Camfil Farr Magna/Pack is constructed of all-welded 14-gauge galvanized steel (also available in 304SST) and is reinforced with channel bracing to withstand 8.0” w.g. positive or negative pressure without compromising the filter or door . Filters are available in efficiencies from 95% to 99.995% at 0.3 microns More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Sidelock The Camfil Farr SlimLine Series 41 Ducted Ceiling Module is ideal for applications where minimal installation space is available and ultra clean air is a requirement. More Details/Full Product Line: Click Here to View

		Supplier:Camfil Farr / Model:: Type 8 Holding Frames The Camfil Farr Type 8 filter holding frame, with a variety of fasteners, will allow the installation of various combinations of ASHRAE prefiltration and final filtration. The Camfil Farr Type 8 holding frame may be assembled in banks up to six units high and any number of units wide (flat stock vertical stiffener bars are required for banks 4 to 6 units high alternating every other filter frame). More Details/Full Product Line: Click Here to View

		Supplier:Dwyer / Model:: Magnehelic Gauge Dwyer Products has been producing a broad range of gages, measuring and control instruments for pressure, temperature, level and flow applications plus a complete valve product line. Many of the company’s products are widely recognized by their brand names, such as: magnehelic®, Minihelic® and Capsuhelic® , pressure gages; Slack-Tube® and Flex-Tube®, manometers; Photohelic®, switch/gages; Rate-Master®, Mini-Master® and Visi-Float® flowmeters; and Dwyer® pressure switches. More Details/Full Product Line: Click Here to View

		Supplier:Filtration Group / Model:: Pad Holding Frame Filtration Group Pad Holding Frames make changing filters a snap. There’s less to carry to the jobsite…disposal is simplified. Pads are changed quickly, safely and efficiently. Pad and frame systems are as easy as 1-2-3: 1. Open hinged gate 2. Remove dirty pad and install new filter pad 3. Close gate More Details/Full Product Line: Click Here to View

		Supplier:Smith / Model:: Mesh filter Smith Filters Are made from heavy, rust proof. Aluminum, these mesh filters are designed for the tougher jobs. Thoroughly tested, these filters surpass the requirements of Federal Specifications ASTM F872. Designed with an extra layer of bold corrugation to protect the finer layers behind, these filters can stand up to the hard handling some other lighter filters can’t. Applications include air handling units, both heating and cooling in a wide range of manufacturing plants as well as office buildings. The Smith HEAVY-DUTY Filter can also be used in grease applications where allowed by state regulations. More Details/Full Product Line: Click Here to View

		Supplier:ViskonAire / Model:: Zip-Lok Upgrade your existing paint spray booth efficiently and economically with the Ziplock Air Filter System. Anyone can install Ziplock with tools normally found in any body shop. More Details/Full Product Line: Click Here to View