HOME | FIRM PROFILE | CONTACT US | BLOG |



Filter Sales & Service, Inc stocks a comprehensive line of filtration products to meet the needs of our customers. We continually stock new items and products, and also carry custom filtration products and cleanroom supplies from a wide variety of manufacturers. Please feel free to contact one of our office locations, or phone us at 1-800-848-9305 to inquire about products you may need, but may not find on our website.


Pleated Filters

Aerostar Green Pleat | MFG: Aerostar Green Pleat

The AeroStar® MERV 13 Green Pleat is specifically designed to meet the air filtration efficiency criteria required to gain points toward certification in the Leadership in Energy and Environmental Design (LEED) Green Building rating system. Most air filters reaching MERV 13 high efficiency levels require greater depth and retrofitting expense to be installed.

The Green Pleat delivers high efficiency in a compact 2” depth design allowing immediate installation with absolutely no modification to existing equipment. Simply replace the existing lower efficiency pleat or disposable air filter with the Green Pleat upgrade the system to the LEED required MERV 13 level.

View Technical Sheet View Available Sizes & Prices

30/30 Pleated Filter | MFG: Camfil Farr

The Camfil Farr 30/30 has set the industry standard for pleated panel filters since 1963. With over 45 design
enhancements, it continues to provide the industry’s best value for medium efficiency filtration. Setting the standard by which other pleated filters are judged, modern media manufacturing techniques and proprietary technological advancements ensure that the Camfil Farr 30/30 is: ~ Guaranteed to perform • at the rated efficiency, or better, throughout the life of the filter. Guaranteed to last • longer than any other
pleated panel filter available. Performing at MERV 8, using a mechanical particle capture principle, the 30/30 will not drop in efficiency while in service as will other pleated panel filters that incorporate an electret charge to obtain a MERV 8 value. Its radial pleat design provides the longest life and lowest average pressure drop reducing the number of filter changes so your facility will use less fan power to move air through the filter. The high wet-strength beverage frame and welded wire media backing provide structural integrity in any type of HVAC application virtually eliminating the additional costs associated with filter bypass or filter failure. ~ Available in 1”, 2” or 4” deep configurations, the 30/30 is ideal for commercial, industrial, institutional or any other application where the ultimate level of protection of equipment and indoor air quality is a concern. Its superior performance characteristics relating to human and environmental health, energy efficiency, materials selection and indoor environmental quality make the 30/30 the prefilter of choice for those facilities pursuing green building status. ~ The Camfil Farr 30/30 has an Energy Cost Index (ECI) of
five stars, the highest performance rating available.

View Technical Sheet View Available Sizes & Prices

Aeropleat III | MFG: Camfil Farr

Standard-Capacity Pleated Panel Filter

Meeting Today’s Standards
The Camfil Farr Aeropleat® III pleated filter offers medium grade ASHRAE efficiency and sets the performance standard for those upgrading from lower efficiency throw-aways or pads. Using a mechanical particle capture principle, the Aeropleat III is a MERV 6 filter when evaluated per ASHRAE Standard 52.2-1999.

For Today’s Applications
As a stand-alone filter, the Aeropleat III will remove many of the contaminants associated with today’s indoor air quality concerns. Available in 1”, 2” and 4” depths, its increased media area offers an extended service life when compared to lower efficiency throw-aways or pads. Applications include commercial buildings, educational facilities and specialty manufacturing. As a pre-filter, the Aeropleat III offers protection for the higher efficiency final filters required for today’s high-technology applications.

Built for Today’s HVAC Systems
• 10 pleats per linear foot (2” deep model) in a radial pleat design for full use of media area
• Optimum blend of cotton and synthetic fibers provides medium grade ASHRAE performance and increased dust-holding capacity
• Welded wire media grid is treated for corrosion resistance and prevents media oscillation or pull-away
• High wet-strength beverage board frame creates a rigid and durable filter pack. The pack will withstand 2.0” w.g. without failure.
• Available in 1”, 2” and 4” depths

View Technical Sheet View Available Sizes & Prices

Aeropleat IV | MFG: Camfil Farr

Camfil Farr Aeropleat IV ~ High-Capacity Pleated panel Filter ~ Meeting Today’s Standards. The Camfil Farr Aeropleat® IV extended surface pleated filter offers medium grade ASHRAE efficiency for high capacity dirt loading applications. Incorporating a mechanical particle capture principle, the Aeropleat IV is a MERV 6 filter when evaluated per ASHRAE Standard 52.2-1999. ~ For Today’s Applications
As a stand-alone filter, the Aeropleat IV will remove many of the contaminants associated with today’s indoor air quality concerns. Available in 1”, 2” and 4” depths, its increased media area offers an extended service life when compared to standard capacity pleated filters. Applications include commercial buildings, educational facilities and specialty manufacturing. As a pre-filter, the Aeropleat IV offers protection for the higher efficiency final filters required for today’s high-technology applications. ~ Built for Today’s HVAC Systems • 15 pleats per linear foot (2” deep model) in a radial pleat design for full use of media area • A cotton and synthetic media blend provides medium grade ASHRAE performance and high dustholding capacity • Welded wire media grid is treated for corrosion resistance and prevents media oscillation or pullaway • High wet-strength beverage board frame creates a rigid and durable filter pack. The pack will withstand 2.0” w.g. without failure. • Available in 1”, 2” and 4” depths

View Technical Sheet View Available Sizes & Prices

Kleen Pleat | MFG: Fiberbond

Kleen Pleat Gold

The Only pleat media with Dustlok adhesive, Spor-Ax antimicrobial and rigid enough that a support wire backing is not required. Spor-Ax effectively controls growth of mold, mildew, algae and fungi on the filter. Fiberbond filters with Spor-Ax do not support microbial growth.

Independent laboratory test results on a 24” x 24” x 2” – 8 pleats per foot:
ASHRAE 52.1 Average Efficiency 39.1% ASHRAE 52.2 MERV 7

Media Thickness
At Twice the thickness of typical poly/cotton media the Kleen Pleat Gold with Dustlok adhesive locks in trapped dirt. No sifting of dust. No voids or open areas as with lighter weight media.

Media Strength
A unique blend of synthetic fibers bonded with a flame retardant binder forms a high strength media. At over 6 ounces per square yard Kleen Pleat Gold media weighs 2 to 3 times that of typical pleat media.

No Support Wire Backing
This combination of fibers, binder, weight and thickness provides a media that does not require the need for a wire support backing. Wire backing has no filtration ability. Its only function is to support a lightweight flimsy media. Kleen Pleat Gold can be incinerated.

A Size to Meet Your Needs
Kleen Pleat Gold is available in a full range of standard and custom sizes.
One Inch Series – 12 pleats per foot.
Two Inch Series – 8 pleats per foot and 12 per foot high capacity.
Four Inch Series – 8 pleats per foot and 11 per foot high capacity.

View Technical Sheet View Available Sizes & Prices

Kleen Pleat Special | MFG: Fiberbond

Kleen Pleat Gold

The Only pleat media with Dustlok adhesive, Spor-Ax antimicrobial and rigid enough that a support wire backing is not required. Spor-Ax effectively controls growth of mold, mildew, algae and fungi on the filter. Fiberbond filters with Spor-Ax do not support microbial growth.

Independent laboratory test results on a 24” x 24” x 2” – 8 pleats per foot:
ASHRAE 52.1 Average Efficiency 39.1% ASHRAE 52.2 MERV 7

Media Thickness
At Twice the thickness of typical poly/cotton media the Kleen Pleat Gold with Dustlok adhesive locks in trapped dirt. No sifting of dust. No voids or open areas as with lighter weight media.

Media Strength
A unique blend of synthetic fibers bonded with a flame retardant binder forms a high strength media. At over 6 ounces per square yard Kleen Pleat Gold media weighs 2 to 3 times that of typical pleat media.

No Support Wire Backing
This combination of fibers, binder, weight and thickness provides a media that does not require the need for a wire support backing. Wire backing has no filtration ability. Its only function is to support a lightweight flimsy media. Kleen Pleat Gold can be incinerated.

A Size to Meet Your Needs
Kleen Pleat Gold is available in a full range of standard and custom sizes.
One Inch Series – 12 pleats per foot.
Two Inch Series – 8 pleats per foot and 12 per foot high capacity.
Four Inch Series – 8 pleats per foot and 11 per foot high capacity.

View Technical Sheet View Available Sizes & Prices

Aerostar 400 Pleat | MFG: Filtration Group

Filtration Group Aerostar Series 400 Pleated Air Filters ~ incorporates a 100% synthetic media with an ASHRAE 52.1 average atmospheric efficiency of 25% to 30% and an average arrestance exceeding 90% by weight. The 1” and 2” filters handle velocities up to 500 fpm – the 4” filters up to 625 fpm.~ The media is bonded to a metal grid on the air-exiting side, preventing fluttering, and maintaining uniformity of the pleats. The filter pack is enclosed in a heavy-duty, moisture resistant, die-cut frame that will not warp, crack or distort under normal operating conditions. ~ Front and back media retainers are an integral part of the filter frame. The medial pack is bonded to every part of the frame, preventing any possibility of air by-pass. Integral pleat separators on the 4” filters provide additional pleat stabilization for the most demanding application

View Technical Sheet View Available Sizes & Prices

Aerostar 400 High Capacity | MFG: Filtration Group

Filtration Group Aerostar 400 High Capacity Pleated Air Filters ~ incorporates a 100% synthetic media with an ASHRAE 52.1 average atmospheric efficiency of 25% to 30% and an average arrestance exceeding 90% by weight. The 1” and 2” filters handle velocities up to 500 fpm – the 4” filters up to 625 fpm. ~ The media is bonded to a metal grid on the air-exiting side, preventing fluttering, and maintaining uniformity of the pleats. The filter pack is enclosed in a heavy-duty, moisture resistant, die-cut frame that will not warp, crack or distort under normal operating conditions. ~
Front and back media retainers are an integral part of the filter frame. The medial pack is bonded to every part of the frame, preventing any possibility of air by-pass. Integral pleat separators on the 4” filters provide additional pleat stabilization for the most demanding application

View Technical Sheet View Available Sizes & Prices

Aerostar 400 HC Special Size | MFG: Filtration Group

Filtration Group Aerostar 400 High Capacity Pleated Air Filters ~ incorporates a 100% synthetic media with an ASHRAE 52.1 average atmospheric efficiency of 25% to 30% and an average arrestance exceeding 90% by weight. The 1” and 2” filters handle velocities up to 500 fpm – the 4” filters up to 625 fpm. ~ The media is bonded to a metal grid on the air-exiting side, preventing fluttering, and maintaining uniformity of the pleats. The filter pack is enclosed in a heavy-duty, moisture resistant, die-cut frame that will not warp, crack or distort under normal operating conditions. ~
Front and back media retainers are an integral part of the filter frame. The medial pack is bonded to every part of the frame, preventing any possibility of air by-pass. Integral pleat separators on the 4” filters provide additional pleat stabilization for the most demanding application

View Technical Sheet View Available Sizes & Prices

Aerostar 1100 | MFG: Filtration Group

Filtration Group Series 1100 ~ pleated filters incorporates a 100% synthetic media with an ASHRAE 52.1 MERV 11 (minimum efficiency reporting value). The 1” and 2” filters handle velocities up to 500 fpm – the 4” filters up to 625 fpm. The media is chemically bonded to a metal grid on the air-exiting side, preventing fluttering, and maintaining uniformity of the pleats. The filter pack is enclosed in a heavy-duty, moisture resistant, die-cut frame that will not warp, crack or distort under normal operating conditions. ~
Diagonal front and back media retainers are an integral part of the filter frame. The media pack is bonded to every part of the frame, preventing any possibility of air by-pass. Integral pleat separators on the 4” filters provide additional pleat stabilization for the most demanding applications. ~ Rigid construction in consistent media extends the service life. ~ Well-built, efficient and easy-to-handle medium efficiency filters ~ Achieves MERV 11 (per ASHRAE Standard 52.2) ~ Low initial pressure drop ~ Consistent efficiency

View Technical Sheet View Available Sizes & Prices

Airflow Pleat | MFG: Airflow Products

Economy, Standard and High Capacity medium efficiency pleated panel filters

Our extended surface pleated panel filters are designed for use in air filtration systems and equipment, as stand alone basic efficiency products or as pre-filters to higher efficiency bag, rigid box or cell type filter. As a standard offering, the Series 2000 and 3000 Filters achieve MERV 8, as ASHRAE STD. 52-2.

The 26 point clay coated, kraft-board die cut frame, diagonal and horizontal support members, radial wedge design and expanded metal media support create one of the most rigid filters of its type in the industry.

The media pack, comprised of 100% polypropylene fibers, is bonded to the inside perimeter of the enclosure frame by a moisture resistant adhesive, providing a continuous and positive seal.

The standard offering is rated by Underwriters Laboratories as Class II, per UL Standard 900.

Available in Economy, Standard and High Capacity versions.

View Technical Sheet View Available Sizes & Prices

Airflow Pleat HC | MFG: Airflow Products

Economy, Standard and High Capacity medium efficiency pleated panel filters

Our extended surface pleated panel filters are designed for use in air filtration systems and equipment, as stand alone basic efficiency products or as pre-filters to higher efficiency bag, rigid box or cell type filter. As a standard offering, the Series 2000 and 3000 Filters achieve MERV 8, as ASHRAE STD. 52-2.

The 26 point clay coated, kraft-board die cut frame, diagonal and horizontal support members, radial wedge design and expanded metal media support create one of the most rigid filters of its type in the industry.

The media pack, comprised of 100% polypropylene fibers, is bonded to the inside perimeter of the enclosure frame by a moisture resistant adhesive, providing a continuous and positive seal.

The standard offering is rated by Underwriters Laboratories as Class II, per UL Standard 900.

Available in Economy, Standard and High Capacity versions.

View Technical Sheet View Available Sizes & Prices

Airflow Pleat HC Merv13 | MFG: Airflow Products

High Capacity medium efficiency pleated panel filters

Our extended surface pleated panel filters are designed for use in air filtration systems and equipment, as stand alone basic efficiency products or as pre-filters to higher efficiency bag, rigid box or cell type filter. As a standard offering, the Series 2000 and 3000 Filters achieve MERV 8, as ASHRAE STD. 52-2.

The 26 point clay coated, kraft-board die cut frame, diagonal and horizontal support members, radial wedge design and expanded metal media support create one of the most rigid filters of its type in the industry.

The media pack, comprised of 100% polypropylene fibers, is bonded to the inside perimeter of the enclosure frame by a moisture resistant adhesive, providing a continuous and positive seal.

The standard offering is rated by Underwriters Laboratories as Class II, per UL Standard 900.

Available in Economy, Standard and High Capacity versions.

View Technical Sheet View Available Sizes & Prices


Main Office: 15 Adams Street - Burlington, MA 08103 | CT Office: 15 Kimberly Ave - West Haven, CT 06516 | Toll Free 800:848-9305



Filter-Replacement Plans Save Energy Improve IAQ
Post on:03/21/2014
Filter Facts: Improve IAQ, Lower Energy Costs
Post on:04/18/2014
Air Filtration for Healthcare Facilities
Post on:04/22/2014
Regular HVAC Filter Changes Saves $$
Post on:10/06/2014